BLOG

DRYER VENT SERVICES

Why Dryer Vent Inspection Is Necessary

A dryer evaporates the water from clothes through blowing and circulating hot air inside it, as they are tumbling inside a spinning drum. A gas burner or an electrical heating element provides the heat, while the dryer vent gets rid of the moisture produced before moving it outside your home. Over time and with constant use, lint and debris fill the dryer vents, and when not given attention, they can become a fire hazard.  To prevent this problem and keep your loved ones safe, you need a regular dryer vent inspection.

What Everyone Must Know About Dryer Vent Inspection

Why get a regular dryer vent checkup? Check out the following for what to know about this important home safety inspection.

A regular inspection prevents common problems of a dirty dryer vent

Dryer duct tubes falling off the wall attachment points or the dryer is a typical problem along with signs, including a smelly, hot, and moist laundry room. 

Other problems include a punctured or clogged tube, which can be a cause of mold buildup and fire hazard because the hot air coming from the dryer is blocked and might burn the lint accumulated in the dirty vent.

Pests, including vermin, rats, and mice can also enter and invade your home! Homeowners not performing a regular dryer vent inspection fail at examining the metal grille that covers the dryer vent’s exit.  Thus, it’s left open or detached, becoming an entry point for rats and other animals.

The danger of venting in the wrong area

Venting in the wrong areas, such as the garage, attic, or crawlspace is a bad decision because it can cause rotting to the surrounding areas like the wall and accumulation of mildew.

Additionally, much lint will be moved to that area. It is a fire hazard because lint is flammable and can spark and burst into flames, increasing your home’s chance of catching fire.

An irregularly inspected dryer vent can cause rot and mildew (and cost you a lot of money)

While different factors are involved here, rotting and mildew issues are problems with an irregularly inspected dryer vent, especially if you often use your dryer and it stands uncleaned for a long time.

If the mildew on the surface goes deeper into your home, it can result in high repair costs and sometimes even in the cutting and then replacing of the badly affected home structure like walls.

What are the requirements of a dryer vent exhausting moisture to the exterior of your home?

The vent must be connected, typically behind but may also be beneath the dryer. A professional inspector can carefully check and ensure that the connection is tight and correct.

It must not also be restricted, especially regards to airflow because it can be a fire hazard, as it restricts the escape of the exhaust air. 

An inspection professional can note this in his report and recommend you with potential solutions.

Why is airflow restriction dangerous? The exhaust steam carries lint, a highly-flammable material, with it.  Lint can collect in the duct and limits the dryer’s ability to expel the heated water. It then accumulates heat energy, overheating and suffering from electrical failure. It can lead to sparks that will light up the lint accumulated in the dryer vent and cause fire in the whole house.

Dryer vent inspection professional’s maintenance tips

  • Get the vent cleaned at least once a year if it is venting out the roof. 
  • If the vent is out the sidewall, it must be at least six feet away from your air conditioner, or else, the lint from it can also clog the AC. And as the heat’s being moved into the AC, it might not work as it should.
  • Replace any damaged vent especially if someone has hit it.

Why You Really Need A Dryer Vent Inspection?

Yes. Home inspectors should inspect a home’s clothes dryer exhaust system, according to standards of practice. For instance, it should vent outdoors directly unless if a ventless dryer is installed. It also states that homes should not use devices that let heat and moisture vent back inside.

A regular and thorough dryer vent inspection can protect your home from fires, while ensuring the dryer vent system’s efficient and safe operation. The pros can ensure of a complete inspection to identify any hazards on health, safety, and fire, which may result from non-code compliant materials, poor vent dryer construction, and a wide range of obstructions.

Specialists can perform a visual inspection of your system.

  • Termination point
  • Joint connections
  • Vent lines
  • Washer Hoses
  • Lint traps

As equally important as installation and cleaning, an inspection is necessary to prevent lint buildup. It is why a professional inspection and cleaning at least once a year or as needed matters. It is to ensure proper airflow and lint buildup prevention in the vent.

How often should you check your dryer vent?

As mentioned, it must be checked once a year or as needed depending on dryer’s usage and household’s size.  Larger households, for instance, may need three times inspection and cleaning annually. It is to ensure that your dryer will function optimally and no buildup of lint. 

A few telltale signs your vent needs inspection and cleaning include the dryer taking longer to dry clothes or the laundry room is becoming hot and accumulating a lot of moisture. You may also notice signs of mold building up in the area where there is venting out.

Checking the vent regularly also reduce the chances of a dryer fire or toxic chemicals leaking and spreading in your home.

Final Thoughts

The specialists understand how your dryer vent works and recognize the uniqueness of every household.  They can routinely do a dryer vent inspection to ensure its tight joint connections, identify any excessive lint accumulation, and help you prevent fire.  They can perform a thorough inspection to identify any issues and offer you with the right solution. After an inspection, they can provide you with a written report and estimate upon the inspection and guide you through any services required for your home and family’s safety.